Phone 734-422-8510
email sn95guy@msn.com
EFI Modular Engine Parts
For some parts interchange tips, see out new "Parts Interchange" Page
click on pictures to enlarge
4.6
Ceramic Coated Headers
fits 1993 to 2004 4valve Cylinder heads
perfect for 96/04 4V Cobra or Street Rod Applications
$209.95
pr.
#KK9430CCH
* includes gaskets and hardware! dimensions 25" installed outside to outside
* does not fit Cobra R, Ford GT or 2007/08 5.4 SVT S/C Heads
* these are discontinued M-9430-D465 units no longer available from FRPP
Brand
5.4 4valve Billet Aluminum Adaptors to install 4.6 4valve Intake Systems!
That's Right!!! You can now install your 1999-2004 4.6 Cobra, Aviator or Marauder EFI Intake System on a 5.4 4valve Navigator Long Block! Made from 6065 T6 billet aluminum. includes new hardware
$369.95 pr. #KK9424AF
* must use modified cobra water cross over tube.
the 5.4 engine is approx. 1 1/2" wider than the 4.6
2007/08 5.4 S/C SVT
CAMSHAFT UPGRADE
as used in factory Ford GT
$469.95 set of 4
*can be used with stock valve springs #KK6250GT
Brand
4.6 or 5.4 Oil/Water Block Adaptor!
accepts AN fittings for remote oil filter or oil cooler
has OEM radiator hose outlet $119.00 #KK6066
*perfect for street rods and race cars! mandatory when relocating the alternator to the side of the block
*note: on 2 valve applications, the aluminum spacer under the power steering pump must be trimmed back to clear the adaptor
* does not fit 07/08 5.4 SVT S/C Engines
Brand
Alternator Relocation Kit
positions alternator down on L.H. side of block above p.s. pump
includes cast aluminum bracket, alternator and hardware
$279.95 #KK13800
* 3 pin connector is different on this alternator. must be re-wired or connector changed when used in Mustang or Cobra applications
*must be used with Kar Kraft Adaptor Manifold above. perfect for race car applications with modified intakes! NOTE: frame rail clearance issues may arise on some vehicles on driver's side. Late model mustang and cobra models may have to modify alternator mounting surface to clear brake lines.
Brand
Alternator Idler Pulley and Bracket
installs in original factory alternator position
$89.95 #KK13801
must be used with Kar Kraft Adaptor Manifold above
Brand
4.6 2V and 4V Power Steering Delete
includes bracket, pulley and spindle
installs in factory P.S. position to side of block
$89.95
#KK3601PSD
* does not fit 03/04 S/C Cobra or 07/08 5.4 SVT S/C Engines
A Full 3/8" thick!
4.6 and 5.4 4valve Header Flanges
fits 96-2005 32valve heads. Complete w/matching gaskets
$99.95 pr. #KK9430HF
*note-does not fit Cobra R, Ford GT or 2007/08 5.4 SVT heads
brand
99/01 Cobra- 03/04 Mach1- 03/05 Marauder
4.6 32valve Upper to Lower Manifold Spacer
1/4" aluminum spacer plus additional gasket thickness crams more air between the upper and lower manifolds! Complete with extra gasket and 6 longer bolts.
$99.95 #KK9424SP
Brand
4.6 Modular Bell housing for C4 Automatic Trans!
bolt the incredible vintage C4 to the new 4.6!
$469.95 #KK7012C4
New Flywheels for 4.6 2valves
for 6 bolt crankshafts only
accepts 10 1/2" clutch above
OEM factory, not after market
$89.95 ea. zero balanced
Brand
4.6 EGR Delete Kit
includes cast aluminum intake block off plate with bolts, gasket and special steel plug for exhaust manifold port.
$29.95 set. #KK9430EGR
fits 2V or 4V. * does not fit 5.4
4.6 & 5.4 4valve balancers
nice used take offs $49.95
* not correct for 2003/04 S/C Snake or Lightning
4.6 Steel Performance Damper-6 rib
fits 2valve and 4valve
(exc. 2003/2004 cobra) $89.00
*note: 4valve applications have 3% under drive built in damper
2003/04 4.6 4valve S/C Snake Balancers
Unique to the 03/04 S/C Snake Engine
$249.95 Brand New!
* integral splined hub-must use with factory super charger
1999/03 5.4 2valve S/C Lightning Balancers
Unique to the S/C Lightning and Harley engine
$209.95 Brand New!
* integral splined hub-must use with factory super charger
Nice used 2007 5.4 SVT Balancers
10 rib S/C + 6 rib accessory
$499.00
4.6 3valve Timing Covers
nice used take offs $99.00
5.4 4valve Ford GT
nice used take offs $699.00
*works for 2007 SVT 5.4 with minor modification
*does not fit Navi
*ask about our nice used GT blocks, dry sump systems and heads! Many other used GT and used 2007 SVT engine parts in stock!
2003/04 4.6 4valve S/C Snake
2R3V casting- unique to the 03/04
Brand new with idler pulley $499.95
* you must use this timing cover with factory 03/04 supercharger
2003/04 4.6 4valve S/C Snake
Accessory drive belt tensioner-for 6 rib
*this is not the S/C tensioner $49.95
4.6 4valve A/C Eliminator
includes attachment bolts
*6 rib belt application only $49.95
2003/04 4.6 S/C Snake
New-SVT/Manley Rods
$239.95 each
2R3Z-6200-AA
*set of 8 special price $995.99
See our new line of
Brand
Carbureted Modular Intakes!
click on pics at left
to be taken to the "Modular Carbureted" page
4.6 2valve or 4.6 4valve
Head Gasket & Bolt kit
$119.95 for the 2V kit
$129.95 for the 4V kit
*not correct for super charged applications
Lincoln Navigator 5.4 32valve Head Castings
Bare, no valves $449.95 pr.
4.6 4valve Snake Oil Pans
Brand new!! $39.95
4.6 32valve Front Sump Pan Kit
includes new pan, pick up tube, dipstick & tube
$259.95 4pc. kit #KK6675FS
note: dipstick tube must be modified for correct oil level reading. dipstick must bre re-calibrated for "full" mark
4.6 & 5.4 32valve Valve Cover
Gasket Kits!
fits 1993-2008 4V only
OEM factory parts
includes 2 neoprene valve cover gaskets, 8 spark plug boss gaskets and 20 valve cover bolt grommets!
$69.95 set #KK6582VCG
email sn95guy@msn.com