EFI Modular Parts

Deal of the WEEK!!!!

Finned Coil Covers!

$59.95 pr!

in the Valve Cover Page

and

2008 Mustang GT engine

$2195.00 in the engine page!

Phone 734-422-8510

email sn95guy@msn.com

EFI Modular Parts

For some parts interchange tips, see out new "Parts Interchange" Page

click on pictures to enlarge

See our new line of Carbureted Modular Parts and Engines in the "Carbureted Modular" page!!

Nice used cobra steel cranks

$395.00 takes 8 bolt flywheel

* used cranks are checked OK. std./std. sizing

Brand

5.4 4valve Billet Aluminum Adaptors to install 4.6 4valve Intake Systems!

That's Right!!! You can now install your 1999-2004 4.6 Cobra, Aviator or Marauder EFI Intake System on a 5.4 4valve Navigator Long Block! Made from 6065 T6 billet aluminum. includes new hardware

$369.95 pr. #KK9424AF

* must use modified cobra water cross over tube #KK9424AFX below

the 5.4 engine is approx. 1 1/2" wider than the 4.6

5.4 4valve Water Cross over tube

Brand

these are widened 4.6 Cobra tubes to fit the 5.4 4valve engine

$169.95 #KK9424AFX

2007/08 5.4 S/C SVT

CAMSHAFT UPGRADE

as used in factory Ford GT

$449.95 set of 4 #KK6250FGT

*can be used with stock valve springs

Brand

4.6 or 5.4 Oil/Water Block Adaptor!

accepts AN fittings for remote oil filter or oil cooler

has OEM radiator hose outlet $119.00 #KK6066

*perfect for street rods and race cars!

mandatory when relocating the alternator to the side of the block

*note: on 2 valve applications, the aluminum spacer under the power steering pump must be trimmed back to clear the adaptor

* does not fit 07/08 5.4 SVT S/C Engines

Brand

Alternator Relocation Kit

positions alternator down on L.H. side of block above p.s. pump

includes cast aluminum bracket, alternator and hardware

$279.95 #KK13800 *does not fit 03/04 cobra

*for 6 rib belt systems only

* 3 pin connector is different on this alternator. must be re-wired or connector changed when used in Mustang or Cobra applications

*must be used with Kar Kraft Adaptor Manifold above. perfect for race car applications with modified intakes! NOTE: frame rail clearance issues may arise on some vehicles on driver's side. Late model mustang and cobra models may have to modify alternator mounting surface to clear brake lines.

Brand

Alternator Idler Pulley and Bracket

installs in original factory alternator position

*for 6 rib belt systems only

$89.95 #KK13801

must be used with Kar Kraft Adaptor Manifold above

Brand

4.6 2V and 4V Power Steering Delete

includes bracket, pulley and spindle

installs in factory P.S. position to side of block

*for 6 rib belt systems only

$89.95 #KK3601PSD

* does not fit 03/04 S/C Cobra or 07/08 5.4 SVT S/C Engines

A Full 3/8" thick mild steel

4.6 and 5.4 4valve Header Flanges

fits 96-2005 32valve heads. Complete w/matching gaskets

$89.95 pr. #KK9430HF

*note-does not fit Cobra R, Ford GT or 2007/08 5.4 SVT heads

brand

99/01 Cobra- 03/04 Mach1- 03/05 Marauder

4.6 32valve Upper to Lower Manifold Spacer

1/4" aluminum spacer plus additional gasket thickness crams more air between the upper and lower manifolds! Complete with extra gasket and 6 longer bolts.

$89.95 #KK9424SP ON SALE $69.95

New 4.6 Cobra Injectors

factory Ford/Bosche $129.00 set of 8

as factory installed in 1999/01 Cobra, 2003/04 Mach 1 & 2003/05 Marauder

*not correct for 2003/04 S/C Cobra

Brand

4.6 Modular Bell housing for C4 Automatic Trans!

bolt the incredible vintage C4 to the new 4.6!

$469.95 #KK7012C4

2005/08 4.6 Pony GT 3valve Engine Cover

complete with correct hardware

#KK9600EP

ON SALE!!! $64.95

* does not fit V6 engine

New Flywheels for 4.6 2valves

for 6 bolt crankshafts only

accepts 10 1/2" clutch above

OEM factory, not after market

$89.95 ea. zero balanced

New 8 Bolt automatic flywheels

fits any 8 bolt crank 4.6 or 5.4

$89.95 ea. zero balanced

you can now run an automatic transmission behind a Cobra engine!

Brand

4.6 EGR Delete Kit

includes cast aluminum intake block off plate with bolts, gasket and special steel plug for exhaust manifold port.

$29.95 set. #KK9430EGR

fits 2V or 4V. * does not fit 5.4

4.6 Steel Performance Damper-6 rib

fits 2valve and 4valve

*for 6 rib belt systems only

(exc. 2003/2004 cobra) $79.00

*note: 4valve applications have 3% under drive built in damper

2003/04 4.6 4valve S/C Snake Balancers

Unique to the 03/04 S/C Snake Engine

$299.95 Brand New!

* integral splined hub-must use with factory super charger

1999/03 5.4 2valve S/C Lightning Balancers

Unique to the S/C Lightning and Harley engine

$229.95 Brand New!

* integral splined hub-must use with factory super charger

Nice used 2007 5.4 SVT Balancers

10 rib S/C + 6 rib accessory

$499.00

4.6 3valve Timing Covers

nice used take offs $99.00

5.4 4valve Ford GT

nice used take offs $699.00

*works for 2007 SVT 5.4 with minor modification

*does not fit Navi

*ask about our nice used GT blocks, dry sump systems and heads! Many other used GT and used 2007 SVT engine parts in stock!

2003/04 4.6 4valve S/C Snake

2R3V casting- unique to the 03/04

Brand new with idler pulley $659.00

ON SALE!!! $399.95

* you must use this timing cover with factory 03/04 supercharger

4.6 32valve Aviator Timing Covers- Used

$109.95

perfect for new 4valve engine builds

2003/04 4.6 4valve S/C Snake

Accessory drive belt tensioner-for 6 rib

*this is not the S/C tensioner $39.95

4.6 and 5.4 4valve A/C Eliminator

#KK3602ACD

includes attachment bolts

*6 rib belt application only $49.95

2003/04 4.6 S/C Snake

New-SVT/Manley Rods

$239.95 each

2R3Z-6200-AA

*set of 8 special price $995.99

Nice Used 4.6 Cobra

exhaust manifolds

fits 4 valve heads only $95.00 pr.

units taken off 1999/01 Cobra engines

See our new line of Brand

Carbureted Modular Intakes!

click on pics at left

to be taken to the "Modular Carbureted" page

4.6 2valve or 4.6 4valve

Head Gasket & Bolt kit

$119.95 for the 2V kit

$129.95 for the 4V kit

*not correct for super charged applications

Lincoln Navigator 5.4 32valve Head Castings

Bare, no valves $449.95 pr.

4.6 4valve Snake Oil Pans

unpainted

Brand new!! $49.95

4.6 32valve Front Sump Pan Kit

includes new pan, pick up tube, dipstick & tube

$249.95 4pc. kit #KK6675FS

note: dipstick tube must be modified for correct oil level reading. dipstick must be re-calibrated for "full" mark. instructions for this modification are included.